-1 smTruncErr/qErr the truncation indicator alone is wider than the specified width / not in queue
-2 vTypErr the QType field of an entry in vertical retrace queue isn't vType
-17 controlErr this driver can't respond to this control call
-18 statusErr this driver can't respond to this status call
-19 readErr this driver can't respond to read calls
-20 writeErr this driver can't respond to write calls
-21 badUnitErr the driver reference number doesn't match any found in the unit table
-22 unitEmptyErr the driver reference number specifies NIL handle in unit table
-23 openErr the requested read/write permission doesn't match driver's open permission or an attempt to open RAM serial driver failed
-24 closeErr permission to close .MPP driver was denied
-25 dRemovErr an attempted was made to remove an open driver
-26 dInstErr the driver could not be found in resource file
-27 abortErr the I/O request was aborted by KillIO
-28 notOpenErr the driver isn't open
-33 dirFullErr the directory is full
-34 dskFullErr the disk is full
-35 nsvErr no such volume exists
-36 ioErr an I/O error occurred
-37 bdNamErr the specified filename was invalid
-38 fnOpnErr the specified file is not open
-39 eofErr the logical end-of-file was reached while reading
-40 posErr an attempt was made to position before the start of the file
-42 tmfoErr there are too many files open
-43 fnfErr the specified file was not found
-44 wPrErr of a hardware write protect
-45 fLckdErr of a software file lock
-46 vLckdErr of a software volume lock
-47 fBsyErr the file is busy
-48 dupFNErr a file with the specified name and version already exists
-49 opWrErr the file is already open for writing via another access path
-50 paramErr there was an error in the parameter list
-51 rfNumErr the path reference number specifies a nonexistent access path
-52 gfpErr there was an error during GetFPos
-53 volOffLinErr the specified volume is not online
-54 permErr an attempt was made to open locked file for writing
-55 volOnLinErr the specified volume is already mounted
-56 nsDrvErr the specified drive does not exist
-57 noMacDskErr the disk in the drive is not a Macintosh disk
-58 extFSErr there was an external file system error
-59 fsRnErr there was a problem during rename
-60 badMDBErr the master directory block is corrupted: must reinitialize volume
-61 wrPermErr the read/write permission doesn't allow writing
-64 noDriveErr the drive isn't connected
-65 offLinErr there is no disk in the drive
-66 noNybErr this disk is probably blank
-67 noAdrMkErr an address mark could not be found
-68 dataVerErr read-verify failed
-69 badCksmErr a bad address mark was encountered
-70 badBtSlpErr a bad address mark was encountered
-71 noDtaMkErr a data mark could not be found
-72 badDCksum a data mark was encountered on the disk
-73 badDBtSlp a data mark was encountered on the disk
-74 wrUnderrun a write underrun occurred
-75 cantStepErr the drive can't step (Sounds bad)
-76 tk0BadErr track zero could not be found on the disk (Sounds very bad)
-77 initlWMErr the disk controller chip could not be initialized
-78 twoSideErr someone tried to read side two of a disk in a single-sided drive
-79 spdAdjErr the disk speed could not be adjusted correctly
-80 seekErr Drive error
-81 sectNFErr the sector could not be found
-85 clkRdErr the clock could not be read
-86 clkWrErr the time written to the clock chip did not verify
-87 prWrErr parameter RAM written did not verify
-88 printErr the validity status was not $A8
-91 ddpSktErr there was an error opening socket
-91 eMultiErr an address was invalid or the table was full
-92 eLenErr the packet is too large or the first entry of the write-data structure did not contain the full 14–byte header
-93 noBridgeErr no router is available
-94 LAPProtErr a protocol handler is already attached, a node's protocol table is full, no protocol is attached, or protocol handler pointer was not NIL
-95 excessCollsns there was a hardware error
-100 noScrapErr the desk scrap is not initialized
-102 noTypeErr there is no data of the requested type
-108 memFullErr there is insufficient memory left in the heap zone
-109 nilHandleErr a master pointer was NIL
-110 nilPtrErr a pointer was NIL (returned by FailNil)
-111 memWZErr an attempt was made to operate on a free block
-112 memPruErr an attempt was made to purge a locked block
-117 memLockedErr the block is locked
-120 dirNFErr the directory was not found
-123 wrgVolTypeErr this volume is not an HFS volume
-128 userCanceledErr the operation was aborted
-147 regionTooBigError the region is too large or complex
-148 pixmapTooDeepErr the pixel map record is deeper than 1 bit per pixel
-149 mfStackErr there is insufficient stack space
-157 cDepthErr the requested pixel depth is invalid
-188 resourceInMemory the resource is already in memory
-189 writingPastEnd the program tried to write past the end of the file
-190 inputOutOfBounds the offset or count was out of bounds
-192 resNotFound a resource was not found
-193 resFNotFound the resource file was not found
-194 addResFailed AddResource failed
-196 rmvResFailed RmveResource failed
-199 mapReadErr the map is inconsistent with operation
-200 noHardwareErr the required hardware is not available
-201 notEnoughHardwareErr insufficient hardware is available
-203 queueFull there is no room in the queue
-204 resProblem there was a problem loading a resource
-205 badChannel the sound channel is corrupt or unusable
-206 badFormat the resource is corrupt or unusable
-207 notEnoughBufferSpace there is insufficient memory available
-208 badFileFormat the file is corrupt or unusable, or not AIFF or AIFF–C
-209 channelBusy the sound channel is busy
-210 buffersTooSmall the buffer is too small
-211 channelNotBusy the sound channel not currently used
-212 noMoreRealTime there is not enough CPU time available to process the command in real time
-213 badParam a parameter is incorrect
-220 siNoSoundInHardware there is no sound input hardware available
-221 siBadSoundInDevice the sound input device requested was invalid
-222 siNoBufferSpecified no buffer was specified
-223 siInvalidCompression the compression type is invalid
-224 siHardDiskTooSlow the hard drive is too slow to record
-225 siInvalidSampleRate the requested sample rate is invalid
-226 siInvalidSampleSize the requested sample size is invalid
-227 siDeviceBusyErr the sound input device is busy
-228 siBadDeviceName the sound input device name was invalid
-229 siBadRefNum the sound input device reference number was invalid
-230 siInputDeviceErr a sound input device hardware error
-231 siUnknownInfoType an unknown type of information was requested
-232 siUnknownQuality an unknown recording quality was requested
-299 nmTypErr qType was something other than nmType
-308 smUnExBusErr of an unexpected bus error
-330 smBadRefId the reference ID was not found in list
-331 smBadsList the sResource structure was bad; ID1 < ID2 < ID3...
-332 smReservedErr a reserved field not zero
-338 smSelOOBErr the selector was out of bounds; function not implemented
-344 smNoMoresResources the specified sResource data structure was not found
-346 smBadsPtrErr an invalid pointer was passed to sCaldSPointer function
-347 smByteLanesErr the ByteLanes field in card's format block was zero
-450 editionMgrInitErr the Edition Manager is not initialized or could not be loaded
-451 badSectionErr the section type was invalid
-452 notRegisteredSectionErr this section is not registered
-454 badSubPartErr the edition container spec or the edition container was invalid
-460 multiplePublisherWrn another publisher is already registered to this edition
-461 containerNotFoundWrn the alias was not resolved
-463 notThePublisherWrn another publisher wrote this edition
-500 rgnTooBigErr the bitmap would convert into a region larger than 64KB
-600 procNotFound there is no eligible process with the specified process serial number
-601 memFragErr there is not enough room to launch application with special requirements
-602 appModeErr the memory mode is 32-bit, but the application being launched is not 32-bit clean
-605 appMemFullErr the partition size specified in 'SIZE' resource is not big enough for launch
-606 AppIsDaemon this application is background-only
-607 bufferIsSmall the buffer is too small
-608 noOutstandingHLE there is no outstanding high-level event
-609 connectionInvalid the connection is invalid
-610 noUserInteractionAllowed no session is established, and there was an attempt to PostHighLevelEvent from an application in the background
-620 notEnoughMemoryErr there is insufficient physical memory
-621 notHeldErr the specified memory range is not held
-622 cannotMakeContiguousErr the specified memory range could not be made contiguous
-623 notLockedErr the specified range of memory is not locked
-624 interruptsMaskedErr a Virtual Memory function was called with interrupts masked
-625 cannotDeferErr additional user functions cannot be deferred
-800 rcDBNull the data item was NULL
-801 rcDBValue the data was available or successfully retrieved
-802 rcDBError there was an error executing the function
-803 rcDBBadType the next data item not of requested data type
-804 rcDBBreak the function timed out
-805 rcDBExec the query is currently executing
-806 rcDBBadSessID the session ID is invalid
-807 rcDBBadSessNum the session number is invalid
-808 rcDBBadDDev the specified database extension could not be found, or error occurred while opening database extension
-809 rcDBAsyncNotSupp the database extension does not support asynchronous calls
-810 rcDBBadAsyncPB the specified parameter block was invalid
-811 rcDBNoHandler there is no handler for this data type installed for the current application
-812 rcDBWrongVersion the version number is incorrect
-813 rcDBPackNotInited the InitDBPack function has not yet been called
-850 hmHelpDisabled Help balloons are not enabled
-853 hmBalloonAborted constant cursor movement prevented the help balloon from being displayed
-854 hmSameAsLastBalloon the Menu and item are same as previous menu and item
-855 hmHelpManagerNotInited the Help menu is not set up
-857 hmSkippedBalloon there is no balloon content to fill in
-858 hmWrongVersion the version of Help Manager resource is incorrect
-859 hmUnknownHelpType the Help message record contained a bad type
-861 hmOperationUnsupported the Help Manager method parameter is invalid
-862 hmNoBalloonUp no balloon is showing
-863 hmCloseViewActive "Close View" is active and preventing the removal of the Help Balloon
-900 notInitErr the PPC Toolbox has not been initialized yet
-902 nameTypeErr the locationKindSelector in location name was invalid or inappropriate
-903 noPortErr the port name was invalid; unable to open port or bad port reference number
-904 noGlobalsErr the System was unable to allocate memory––critical error
-905 localOnlyErr network activity is currently disabled
-906 destPortErr the specified port does not exist on the destination machine
-907 sessTableErr the PPC Toolbox was unable to create a session
-908 noSessionErr the session reference number was invalid
-909 badReqErr of a bad parameter or invalid state
-910 portNameExistsErr another port is already open with this name
-911 noUserNameErr the destination machine did not recognize the User name
-912 userRejectErr the destination rejected the session request
-915 noResponseErr the application could not be contacted
-916 portClosedErr the port was closed
-917 sessClosedErr the session has closed
-919 badPortNameErr the PPC port record is invalid
-922 noDefaultUserErr the owner name in the "Sharing Setup" control panel has not been specified yet
-923 notLoggedInErr the default user reference number does not yet exist
-924 noUserRefErr a new user reference number could not be created
-925 networkErr an error occurred in the network
-926 noInformErr the target application did not have an inform pending
-927 authFailErr the password entered was incorrect
-928 noUserRecErr the user reference number was invalid
-930 badServiceMethodErr the service method is something other than ppcServiceRealTime
-931 badLocNameErr the location name is invalid
-932 guestNotAllowedEdd the destination port does not allow guest access; authentication is required
-1027 nbpDuplicate the NBP name exists already
-1096 reqFailed the request to contact router failed (retry count exceeded)
-1102 cbNotFound the control block was not found (there were no pending asynchronous calls)
-1105 reqAborted this ERead was aborted by the ERdCancel function
-1273 errOpenDenied the open request was denied by recipient
-1274 errDSPQueueSize the send or receive queue is too small
-1275 errFwdReset read was terminated by forward reset
-1276 errAttention the attention message was too long
-1277 errOpening the attempt to open the connection failed
-1278 errState the connection state for this operation is invalid
-1279 errAborted the request was aborted by the dspRemove or dspClose function
-1280 errRefNum the connection reference number was invalid
-1300 fidNotFoundErr the file ID was not found
-1302 notAFileErr the specified file is actually a directory
-1303 diffVolErr the files are on different volumes
-1304 catalogChangedErr the catalog has changed and CatPosition may be invalid
-1305 desktopDamagedErr the desktop database has become corrupted
-1700 errAECoercionFail the AppleEvent data could not be coerced to the requested descriptor type
-1701 errAEDescNotFound the descriptor record was not found
-1702 errAECorruptData the data in an AppleEvent could not be read
-1703 errAEWrongDataType the wrong descriptor data type was requested
-1704 errAENotAEDesc the descriptor record is invalid
-1705 errAEBadListItem the list item was invalid
-1706 errAENewerVersion a newer version of the AppleEvent manager is required
-1707 errAENotAppleEvent the event is not an AppleEvent
-1708 errAEEventNotHandled the event wasn't handled by any AppleEvent handler
-1709 errAEReplyNotValid AEResetTimer was passed an invalid reply
-1710 errAEUnknownSendMode an invalid sending mode was requested
-1711 errAEWaitCanceled the wait loop for reply or receipt was canceled
-1712 errAETimeOut the AppleEvent timed out (YOU should be using the Futures package!)
-1713 errAENoUserInteraction no user interaction is allowed
-1714 errAENotASpecialFunction the wrong keyword for a special function was specified
-1715 errAEParamMissed the AppleEvent handler did not get all of the required parameters
-1716 errAEUnknownAddressType the AppleEvent address type is unknown
-1717 errAEHandlerNotFound no handler was found for an AppleEvent or a coercion handler
-1718 errAEReplyNotArrived the AppleEvent reply has not yet arrived (YOU should be using the Futures package!)
-1719 errAEIllegalIndex the list index was invalid
-2700 threadsNotInitedErr the Threads package has not been initialized
-2701 badThreadErr the ThreadHandle was invalid
-2702 threadsNotAvailableErr the Threads package is not available
-2703 wrongThreadsVersErr the Threads package that is installed is incompatable with the threads Glue being used
-3101 buf2SmallErr the packet was too large for buffer; partial data was returned
-5012 afpItemNotFound AFP information not found
-5030 afpIconTypeError the size of new icon and one it replaces don't match
-5550 gestaltUnknownErr the Gestalt response could not be obtained
-5551 gestaltUndefSelectorErr the Gestalt selector requested was undefined
-5552 gestaltDupSelectorErr the Gestalt selector already exists
-5553 gestaltLocationErr the Gestalt selector function is not in the system heap
-11000 pictInfoVersionErr the PICT version number is not zero
-11001 pictInfoIDErr the PictInfo ID is invalid
-11002 pictInfoVerbErr an invalid verb combination was specified in the PICT
-11003 cantLoadPickMethodErr the custom pick method is not in the resource chain
-11004 colorsRequestedErr the number of colors requested is out of range or greater than passed to NewPictInfo
-11005 pictureDataErr the picture data is invalid
-13000 pmBusyErr the Power Manager IC is stuck busy
-13001 pmReplyTOErr of a timeout waiting to begin reply handshake
-13002 pmSendStartErr the Power Manager IC did not start handshake
-13003 pmSendEndErr the Power Manager did not finish handshake during send
-13004 pmRecvStartErr the Power Manager did not start handshake during receive
-13005 pmRecvEndErr the Power Manager did not finish handshake during receive
-32767 generalErr End of table marker (not a real error)
